Puntorosso Wilier

A PUNTOROSSO store embraces Wilier Triestina in all of its forms. The furnishings have been specifically designed to accommodate the entire Wilier Triestina product range, the clothing line and the accessories. You feel like you are living a true experience with the house of Rossano Veneto when you are in a PUNTOROSSO store.

puntorosso.wilier.it

 
Technologies

zno treatment

What we commonly refer to as “carbon” is actually a composite of fibers and epoxy resin. The resin’s function is to join and bond the fibers, as well as protect the overall structure from external forces. In order to avoid potential points of weakness that could result from micro-gaps in a composite layup, we’ve implemented an ultra low density nanoparticle Zinc Oxide (“ZnO”) resin. This results in a stronger composite with higher resistance to impact while enabling us to reduce the weight of our frames due to its superior structural integrity. What this means out on the road is improved durability and amazingly responsive handling - the hallmark of our frames.

Technologies

carbon 60 ton

To build a great monocoque carbon frame, we look for the perfect balance of stiffness, comfort and responsiveness at the lightest possible weight. Carbon fiber is an ideal material for bicycle frames because of its qualities of elasticity, capacity to withstand stresses, and its strength-to-weight ratio. The higher the modulus, the stiffer the composite. On the other end of the spectrum, the lower the modulus, the more elastic it will be. In the construction of the Cento1 Superleggera, we implemented MR60H for stiffness in the critical stress areas where lateral stiffness equates to greater efficiency. Then we used T800H and T700SC, with more elastic characteristics, to ensure comfort and sure-footed handling. Each was used as minimally as possible once our demanding strength and durability standards were met, ensuring the lightest weight frame possible.

Technologies

integrated frame protector

Technologies

razor edge design

The Razor Edge Design overlaps top and down tube at at the head tube to form a single, integrated and reinforced unit. Combined with the unique lines of the specially structured fork, we’ve optimized lateral stiffness and front end stability for quick accelerations as well as smooth, precise handling speed.

Technologies

FSS

Floating Suspension System

In this system the shock absorber is not anchored directly onto the frame at a certain point, but floats between two links connecting the rear stays. This unusual design boosts pedal power (and therefore effectiveness when riding uphill) because it gives the bike a low bobbing level and a low pedal kick back. The perfect system for what we wanted to achieve! The utmost efficacy riding downhill and high pedal yield riding uphill, in or out of the saddle.

Technologies

IC integrated cables

The brake and derailleur cables flow inside the frame. This allow the frame to be aerodynamic, protect and cover the cables

Secure payment

Clients service

shop@wilier.it

Free shipment

for a purchase greater than 80 EUR
TERMS & CONDITIONS